Use these EXACT Configurations
If you would like to use the following TCP/IP and RideWay configurations, please do so. You must use these configurations exactly how they appear.
DIRECTIONS:
In the SERVER PC (i.e. the PC running RideWay):
___________
In Network Properties for TCP/IP for Ethernet LAN Card:
Specify an IP Address ENTER: 192.168.1.1
Sub-Net Mask ENTER: 255.255.255.0
In DNS Configuration,
Click 'Disable DNS.'
Host Name: 'Leave BLANK'
Domain Name: 'Leave BLANK'
For the Numbers in 'DNS Search Order: 'Leave BLANK'
____________________
____________________
____________________
For the Numbers in 'Gateway. 'Leave BLANK'
____________________
In Network Properties for TCP/IP for Dial-Up Adaptor:
Click 'Obtain IP Address Automatically'
In RideWay Software,
Under 'Server Control',
Enter 'DNS Server Numbers'
____________________
____________________
____________________
NOTE:Please contact your Internet Service Provider (ISP) and ask for these numbers. Enter them here in RideWay.
To Configure CLIENT PC
In Network Properties for TCP/IP for Ethernet LAN Card:
Specify an IP Address ENTER: 192.168.1.2
Sub-Net Mask ENTER: 255.255.255.0
In DNS Configuration,
Click 'Enable DNS'
Host Name: ENTER: name of machine (EXAMPLE)
Domain Name: ENTER: yourdomain.com (EXAMPLE)
List the Numbers in 'DNS Search Order.
ENTER: 192.168.1.1
In 'Gateway.
Leave BLANK
In Network Properties for TCP/IP for Dial-Up Adaptor:
Click'Obtain IP Address Automatically.'
In the copy of Netscape or Internet Explorer on the client PC Click Options.
Click Network Preferences.
Click Proxies
Under Manual Proxy Configuration, Click View
FTP Proxy ___________________ PORT ________
Gopher Proxy ___________________ PORT ________
HTTP Proxy ___________________ PORT ________
Security Proxy ___________________ PORT ________
WAIS Proxy ___________________ PORT ________
SOCKS Proxy ___________________ PORT ________
In Socks Proxy, ENTER: 192.168.1.1.
In PORT, ENTER: 1080.
NOTE: Leave all other proxy and port entries BLANK.